|
|
|
|
VEHICLES/PARTSIf you would like to place an ad please contact Janet Norris at janetnorris@suddenlink.net
Wanted:
I'm still looking for the Ft clip that holds the head lights for a 65 to 69 2 door Corvair. Must have weather stripping railing attached and have the inner weld ears to attach the sheet metal again. Must be straight too !!!! Please contact me at 613- 376 -6611 or leave a message or send email jphaney@reztel.net and I will get right back to you!! John Haney CORVAIR DIFFERENTIAL Are you putting a lot of horse power through your Corvair differential? A girdled, shoulder-bolted top-cover is now available for Corvair differentials used in either stock or extreme applications i.e. Crown or Kelmark conversions. Made of 1/4" steel plate, this cover is C&C cut and machined and has a pipe threaded breather hole in the factory position with an oil deflector built in, unlike other differential covers where the breather hole is over the ring gear with no deflector so that the gear oil has a tendency to eject out of the breather hole. Dissimilar metals expand, flex and contract at different rates i.e. an aluminum top cover on a stock differential defects at a greater rate than the steel differential itself allowing for a detrimental amount of movement. It is deflection that is one of the major contributors to the Corvair's differential failure. With two opposing bolts over the yokes shouldered the differential cover becomes the girdle. The side loads in a Corvair differential are incredible which creates deflection, the stock tin cover does absolutely nothing to add strength to the case. Send me your differential case and for $50.00 plus shipping and handling, I'll shoulder bolt your case with a machined steel cover which will tremendously aid in the longevity of your Corvair differential. Archibald Evans,2422 Voorhees Ave., Redondo Beach Ca 90278. 310-793-9004 ade383@hotmail.com V8 LOGO MERCHANDISE
Glass mugs with the V8 logo. Contact Karie Hoffman at gnkhoffman@aolcom or 303-233-7020
V8 Registry and exact reproductions of the Original Crown stickers. $3.00 each or 3 for $5.00. Contact Russ Brandenburg v8registry@hotmail.com .
V8 Badges designed by David Browne. Contact Russ Brandenburg v8registry@hotmail.com V8 Registry T-shirts $15.00 each. Contact Chuck Rust starsilkscreen@hotmail.com or 310-679-7443. A portion of the payment goes to support the V8 Registry.
|
